Other Fastway® Towing Accessories

Chain-Up™

If you are tired of the clanking, sparking, and wear of dragging safety chains, the new Fastway® Chain-Up safety chain sling is the fastest and easiest way to keep your trailer's safety chains from dragging. Twisting your chains to shorten them is a hassle and can even be dangerous because it weakens them.

Just slip the Chain-Up over your hitch ball, thread the chains through and adjust them to hang evenly, then couple up your trailer. Nothing to it. When you're done towing, pull the Chain-Up off the ball and lay it over the coupler of your trailer. The Chain-Up will keep your safety chains out of the mud and out of the way until you are ready to tow the next time.

Two different models are available: one for use with a fixed ball mount, and the other for use with an adjustable height or multi-ball ball mount, or weight distribution style hitch head.

There is no faster or easier way to keep your safety chains from dragging!

Go to Store Find a Dealer

Horizontal Rule

Shin Guard™

If you have ever banged your shin on the edge of a ball mount sticking out of the back of your truck you know how painful it can be! The new Fastway® Shin Guard™ safety cover can save you some skin (and may prevent a few cuss words too).

Installing the Shin Guard is fast and easy. You don't even have to take off the hitch ball. Simply slide the Shin Guard down over the top of the ball, stretch the bottom down around the nut, and you're done.

Another great feature of the Shin Guard is the wiring harness tether that keeps the harness wire from dragging on the ground. The tether stays attached to your harness wire with the flat end. Then, when you're ready to tow, you simply pull the loose end through the loop on the side of the Shin Guard and fasten it into place.

The Shin Guard fits both 2-5/6" and 2" hitch balls on ball mounts up to 2-1/2" wide, and is available in three colors: black to blend in, and high visibility orange or yellow.

Go to Store Find a Dealer

Back to Top

Horizontal Rule

Ball Cover

Let the new Fastway tethered Ball Cover take away some of the hassle and mess of keeping your hitch ball lubed up properly.

Keeping your hitch ball greased up is a messy necessity. Other covers are available, but what do you do with them while you are towing? A Ziploc® bag in the glove box is not a great solution!

That's why you need the Fastway tethered Ball Cover. It keeps the grease off your clothes and everything else when you're not towing, and has a convenient tether that loops around your hitch ball to keep the cover right there while you're towing so it's easy to find when you're done.

Two different models are available: one for a 2" ball, and one for a 2-5/16" ball.

Go to Store Find a Dealer

Back to Top

Horizontal Rule

7-Pin Plug Cover

The new Fastway tethered 7-Pin Plug Cover is a fast and easy way to keep dirt, bugs, and corrosion out of your 7-pin wiring harness plug between trips or while your trailer is in storage.

The convenient tether keeps the cover from getting lost so it's right where you need it when you're done towing and ready to put the trailer away.

Go to Store Find a Dealer

Back to Top