Socket Pin and Clip

The Socket Pin and Clip is the original-equipment fastener that secures a spring arm inside the hitch head socket on every Fastway weight distribution hitch. The steel pin passes through the socket and the arm’s trunnion; the spring-steel clip slides through the cross-hole at the end to keep the pin from backing out under load.

This is the part to order when a clip has gone missing or a pin has worn, bent, or walked off at a campsite. It matches the factory pin in diameter and length, so it seats correctly and does not introduce slop at the hitch head. One pin and one clip are included; order two if you want to replace both sides.

If you would rather not keep track of a separate clip, the Socket Pins with Thumb Clips do the same job with the retainer built in. Either way, keep a spare on hand: a lost socket pin means a trailer that cannot be towed until it is replaced.

$4.76

Specifications

  • SKU: 95-01-9400
  • Quantity: 1 socket pin and 1 spring-steel retaining clip (order 2 for both arms)
  • Fits: Equal-i-zer® and Fastway e2™ weight distribution hitch heads, all capacities
  • Function: the socket pin passes through the hitch head socket and the spring arm trunnion, holding the arm in the head; the clip passes through the cross-hole at the tip of the pin so it cannot vibrate out
  • Upgrade option: Socket Pins with Thumb Clips 95-01-9415 (clip built in)
  • Material: hardened steel pin, plated; spring-steel clip; manufactured by Progress Mfg., Provo, Utah
  • Maintenance: Equal-i-zer® recommends keeping the hitch head sockets lubricated; clean and re-grease the socket when you pull the pin for seasonal service
  • Replacement: no fixed interval; replace the pin if it is bent, scored or rusted, and replace the clip any time it has lost its spring or been opened and closed enough to feel loose. Most owners keep a spare pair in the tow vehicle

Products You'll Love